Home > Reviews > Corsair Force 3 120GB SSD drive review
ReviewsSolid State Drives

Corsair Force 3 120GB SSD drive review


Corsair supplies the Force 3 drive inside a small, simple blue themed cardboard box. The drive weights only 80gr and requires no special shock protection, therefore the small box offers more than enough protection during shipping.

Inside the box there is only a simple black 2.5” to 3.5” adapter and mounting screws for installing the drive inside a desktop case which does not support 2.5” devices.

The Force 3 drive is housed inside a simple, black metallic casing identical to the one of almost every SSD drive currently available. The body of the drive is exactly the size of any 2.5” disk.

The bottom metallic plate of the drive is black and entirely clean, with the exception of the small warranty stickers.

Removing the metallic plate reveals the green PCB of the drive. The controller chip can be seen at the left side while the eight flash memory chips can be seen to the right.

The Corsair Force 3 drive utilizes the Sandforce SF-2281 controller, the exact same chip we found inside the Force GT.

The asynchronous flash memory chips are manufactured by Micron and their part number is 29F64G08CBAAA-A, which are slightly different than the 29F64G08CBAAB-12A chips of the Force GT drive.

Leave a Reply

Your email address will not be published.

Read previous post:
MSI’s upcoming A75A-GD55 motherboard pictured

So far MSI has only officially unveiled a pair of AMD A75 motherboards, the A75A-G35 and the A75MA-G55, but the...