Home > Gaming > Memory > TwinMOS Speed Premium PC3200 Review
MemoryReviews

TwinMOS Speed Premium PC3200 Review

1T Testing

Well as most Athlon 64 users know, 1T setting
improves performance quite significantly over 2T, but it is
also very taxing on the memory and quite a hit-and-miss when matching different
memory with different boards. From some users’ feedback, the Asus A8N SLI can
be a little picky with 1T setting when overclocking, so results might be a little
better with other boards.

Settings:

1T/2T Timing: 1T
Cas Latency: 2.5
Ras to Cas Delay (Trcd): 3
Ras Active Time: (Tras): 8
Row PreCharge Time (Trp): 3

As seen from the graph, this setting can only be
achieved when
voltage supplied is 3.1v and above. That is the point 1T setting starts to work
with this board. We see a jump in clockability when the memory voltage switches
from 3.4v to 3.5v.

And finally, for the ultimate performance setting, we tried
1T with Cas 2.0, 2, 5, 2.

Settings:

1T/2T Timing: 1T
Cas Latency: 2.0
Ras to Cas Delay (Trcd): 2
Ras Active Time: (Tras): 5
Row PreCharge Time (Trp): 2

At these “killer” settings, only 3.2v and above would
run. We see that the overclockability jumps up from 219 Mhz to 240 Mhz when
switching from 3.3v to 3.4v.

I went onto try to tweak timings more with the wonderful A64
Tweaker
by CodeRed and got this nice bandwidth:

TeamVR
http://www.vrzone.com
VR-Zone is a leading online technology news publication reporting on bleeding edge trends in PC and mobile gadgets, with in-depth reviews and commentaries.

Leave a Reply

Your email address will not be published.

Read previous post:
Apple Mac Mini Motherboard

The sheer small size of the Mac mini lies in its compact motherboard where it contains a 1.25 or 1.42GHz...

Close