Home > Gaming > Motherboards > Chaintech VNF4 Ultra Voltage Mod

Chaintech VNF4 Ultra Voltage Mod

Soki shows you how to voltage mod your Chaintech VNF4 Ultra to ram up the memory clocks.

Here is the vdimm mod for Chaint

Here is the vdimm mod for Chaintech vnf4 ultra, with nforce4 ultra chipset,
contributed generously to us by soki.

Its very simple, find the IC named LM358 under the first black dimm socket. The
area to search for is circled in green:


Connect a variable resistor of 50Kohm between legs 5 & 8. Lower resistance to
increase vdimm, with about 10 Kohms you have ~3.3V, depends from the +3.3V ATX


Measure Vdimm at any of the spots shown below.

Another thing I notice is either Chaintech has OVP or it is a bios bug, but
over 3Vdimm, after some restarts or crashes, the settings in bios for vdimm if
you have a value of “2,7” or “2,8” for example it resets it to “default”, so I
suggest to leave it “default” and controlling the vdimm according to your needs
via the vdimm mod.

Some of soki’s overclocking results can be read


VR-Zone is a leading online technology news publication reporting on bleeding edge trends in PC and mobile gadgets, with in-depth reviews and commentaries.

Leave a Reply

Your email address will not be published.

Read previous post:
AMD Turion 64 @ IDF Video Clip

Earlier this month, Ben sent over a photo taken over at San Francisco while Intel IDF is running where AMD...